Major Earthquake off alaska

Potential Tsunami from M7.7 earthquake off Alaska – ALL WARNINGS and ADVISORIES are now CANCELED

Last update: January 5, 2013 at 4:57 pm by By

Earthquake overview : A major earthquake has struck off the Alaskan coast with the potential for a tsunami. Finally, no dangerous tsunami was generated but during a couple of hours people had to evacuate to higher grounds in many locations

7.4

First update – Massive earthquake in Alaska
We have just received the report that a massive 7.8 Magnitude quake struck Alaska
More details in a moment

Most important Earthquake Data:
Magnitude : M7.7
UTC Time : 5th January 2013, 08:58:19 UTC
Local time at epicenter : 4th January 2013, 23:58:19 UTC-09:00
Depth (Hypocenter) : 9.9km
Geo-location(s) : 101 km (63 miles) SW (221 degrees) of Edna Bay, AK
102 km (64 miles) W (259 degrees) of Craig, AK
106 km (66 miles) S (182 degrees) of Port Alexander, AK
314km (195mi) WNW of Prince Rupert, Canada
335km (208mi) S of Juneau, Alaska
1032 km (641 miles) NW (315 degrees) of Vancouver, British Columbia, Canada

ectonic Summary
The January 5, 2013 M 7.5 earthquake off the west coast of southeastern Alaska occurred as a result of shallow strike-slip faulting on or near the plate boundary between the Pacific and North America plates.  At the location of this earthquake, the Pacific plate is moving approximately northwestward with respect to the North America plate at a velocity of 51 mm/yr.
This earthquake is likely associated with relative motion across the Queen Charlotte fault system offshore of British Columbia, Canada, which forms the major expression of the Pacific:North America plate boundary in this region. The surrounding area of the plate boundary has hosted 8 earthquakes of magnitude 6 or greater over the past 40 years; In 1949, a M 8.1 earthquake occurred close to the Pacific:North America plate boundary approximately 230 km to the south east of the January 5th earthquake,  as a result of strike-slip faulting. In October of 2012, a M 7.8 earthquake occurred approximately 330 km to the south east of the January 5th event, slightly inboard of the plate boundary, and was associated with oblique-thrust faulting. The latter earthquake was likely an expression of the oblique component of deformation along this plate boundary system. The January 5th, 2013 earthquake is related to that Haida Gwai earthquake three months previously, and is an expression of deformation along the same plate boundary system.

Update 16:52 UTC : This earthquake was shallow, strike-slip and possible on Queen Charlotte Fault & few 100 km N of Haida Gwaii thrust quake
– We thank our many readers to send us your experiences almost immediately after the shaking stopped and before we got the official seismological data

Update 13:24 UTC : Most of the Pacific West Coast people  (USA, Alaska and Canada) have returned to their beds
– Only few of them will feel the many moderate aftershocks which will continue for many days and even weeks

Update 12:31 UTC : Most recent and normally last Tsunami bulletin for Alaska, British Columbia and the West Coast

PUBLIC TSUNAMI MESSAGE NUMBER 4 – NWS WEST COAST/ALASKA TSUNAMI WARNING CENTER PALMER AK
158 AM AKST SAT JAN 5 2013

…THE TSUNAMI WARNING IS CANCELLED…

CANCELLATIONS
————-
* THE TSUNAMI WARNING IS CANCELED FOR THE COASTAL AREAS OF BRITISH COLUMBIA AND ALASKA FROM THE NORTH TIP OF VANCOUVER ISLAND BRITISH COLUMBIA TO CAPE FAIRWEATHER ALASKA/LOCATED 80 MILES SE OF YAKUTAT/

IMPACTS – UPDATED
—————–
* A TSUNAMI WAS GENERATED DURING THIS EVENT BUT NO LONGER POSES A THREAT.
* SOME AREAS MAY CONTINUE TO SEE SMALL SEA LEVEL CHANGES.
* THE DETERMINATION TO RE-OCCUPY HAZARD ZONES MUST BE MADE BY LOCAL OFFICIALS.

RECOMMENDED ACTIONS – UPDATED
—————————–
* DO NOT RE-OCCUPY HAZARD ZONES UNTIL LOCAL EMERGENCY OFFICIALS INDICATE IT IS SAFE TO DO SO.

OBSERVATIONS OF TSUNAMI ACTIVITY – UPDATED
——————————————
TIME OBSERVED MAX  SITE OF MEASUREMENT TSUNAMI HEIGHT
—————————- ————— ————–
PORT ALEXANDER AK 1026 UTC 01-05 – 00.5FT
SITKA AK 1041 UTC 01-05 – 00.3FT

HEIGHT – OBSERVED MAX TSUNAMI HEIGHT IS THE WATER LEVEL ABOVE THE
TIDE LEVEL AT THE TIME OF MEASUREMENT.

DEEP OCEAN PRESSURE SENSORS DID NOT RECORD A TSUNAMI.

Update 11:01 UTC : GREAT NEWS :  ALL WARNINGS and ADVISORIES are now CANCELED

Update 10:44 UTC : Nothing really dramatic has happened and will probably not happen also.
Port Alexander, Alaska, sees 6-inch rise in sea level after magnitude 7.5 earthquake
Some warnings remain in effect but maybe downgraded soon :  THE COASTAL AREAS OF BRITISH COLUMBIA AND ALASKA FROM THE NORTH TIP OF VANCOUVER ISLAND BRITISH COLUMBIA TO CAPE FAIRWEATHER ALASKA/LOCATED 80 MILES SE OF YAKUTAT/

PARTLY GOOD NEWS

A NUMBER OF ADVISORY and WARNING CANCELLATIONS
-------------
* THE TSUNAMI ADVISORY IS CANCELED FOR THE COASTAL AREAS OF BRITISH COLUMBIA FROM THE WASHINGTON-BRITISH COLUMBIA BORDER TO THE NORTH TIP OF VANCOUVER ISLAND BRITISH COLUMBIA
* THE TSUNAMI WARNING IS CANCELED FOR THE COASTAL AREAS OF ALASKA FROM CAPE FAIRWEATHER ALASKA/LOCATED 80 MILES SE OF YAKUTAT/ TO CAPE SUCKLING ALASKA/LOCATED 75 MILES SE OF CORDOVA/
* THE TSUNAMI ADVISORY IS CANCELED FOR THE COASTAL AREAS OF ALASKA FROM CAPE SUCKLING ALASKA/LOCATED 75 MILES SE OF CORDOVA/ TO KENNEDY ENTRANCE ALASKA/LOCATED 40 MILES SW OF HOMER/

Update 10:18 UTC :  Some distances from the epicenter to important locations on land
106km (66mi) WSW of Craig, Alaska
304km (189mi) WNW of Prince Rupert, Canada
341km (212mi) S of Juneau, Alaska
404km (251mi) WNW of Terrace, Canada
610km (379mi) S of Whitehorse, Canada

Screen Shot 2013-01-05 at 11.55.02

…THE TSUNAMI WARNINGS REMAINS IN EFFECT…
…THE TSUNAMI ADVISORIES REMAINS IN EFFECT…

If you are a twitter user, we advise you to subscribe to our @quake_Tracker4 or one of the others. It will not only send earthquake notifications, but also I Have Felt It reports and Tsunami alerts

Update 10:08 UTC :  Good news for the broader connected Pacific / Statement for the Pacific Tsunami and weather Center :

NO TSUNAMI THREAT EXISTS FOR OTHER COASTAL AREAS IN THE PACIFIC  ALTHOUGH SOME OTHER AREAS MAY EXPERIENCE SMALL NON-DESTRUCTIVE  SEA LEVEL CHANGES LASTING UP TO SEVERAL HOURS.

Update 10:12 UTC : Tsunami advisory in effect for Prince Rupert. RCMP members going door to door and evacuating residents close to the shore.

Update 10:04 UTC : USGS has now downgraded the Magnitude from 7.7 to 7.5 with a little change in intensities but an important change for an eventual Tsunami potential

Update 09:49 UTC : A visual overview of the Tsunami a warning (red) and Tsunami advisory (orange) locations along the coast. Red means get away from the coast and walk urgently to higher grounds – Orange : be aware of strong waves and potentially higher tides

Screen Shot 2013-01-05 at 10.39.01

Update 09:34 UTC : Our main concern goes to the fisheries in case of a widespread tsunami.

for more information, go to:    http://earthquake-report.com/2013/01/05/potential-tsunami-from-m7-7-earthquake-off-alaska-warning-in-effect/

 

L. Sharashkin on Materializing Machines

Build Your Own Materializer Build Your Own MaterializerDesign: Materializer’s front panel contains operating instructions written right on the box with a marker.

Build Your Own MaterializerRight side has a pouch for the Energizer.

Build Your Own MaterializerMaterializer’s back panel has a door (rectangle cut in the box on 3 sides) for Administrative Access inside the box.

Build Your Own MaterializerLeft side has a pouch for Success Reports.

Build Your Own MaterializerWrite your wish on a piece of paper and into the Materializer.

Build Your Own MaterializerTake the Energizer and insert it into the slit.

Build Your Own MaterializerThe Energizer protruding from the top of the Materializer is a sign that there is a new wish inside.

Build Your Own MaterializerBecause the Materializer has over 100% success rate, all wishes can be put straight into the Success Reports pouch.

Build Your Own MaterializerThe Materializer on a shelfIt has worked for me. Will it work for you?

Build Your Own Materializer

Story by: Dr. Leonid Sharashkin

Inspirational Matter
Of all the practical exercises we’ve enjoyed at the Ringing Cedars workshops, few aroused as much enthusiasm as building your very own Materializer – a simple device to manifest any wish.

Inspired by Anastasia’s beautiful visions presented in The Energy of Life, I thought: “She keeps saying that thought is the most powerful energy of all, showing that each of us is creator of our own destiny. But – while the rest of us are not quite there yet – we need some kind of tool to help us experience our limitless potential first-hand.” After all, we all know that many things we cannot see do exist, and yet we somehow feel that “seeing is believing!”

And then when I was reading The Power of Luck, it suddenly stuck me: if all this talk about our all-powerful consciousness is actually true, then manifesting any wish should be as easy as a push of a button – literally! The Materializer design was born in my mind and I fervently set about building it out of an old cardboard box.

Just Add Wishes!
Half an hour later it was ready, sporting a big green Button, an Energizer and all! The moment has come to test it. Amazingly enough, I did not have any shadow of doubt: I simply knew it will work.

“Now, what is it that I really need but do not have?” I asked myself. The answer was clear: I needed an Internet connection! My modem had burned down in a thunderstorm a month before, but my Internet provider had been out of stock ever since – and because it was their proprietary model, I could not buy it anywhere else! (Besides, my place is so remote there was no other Internet company I could switch to!) They had been telling me to wait a week, then another week, then another two weeks. And all this month I had been driving thirty miles to town to just check my e-mail – enough to drive anybody crazy!

That very day I had called the Internet provider again and the representative told me that not only was my modem model still out of stock, but that they were no longer confident they would ever have it back in stock as they were upgrading their systems and were moving away from this model altogether! He said he could put me on the waiting list for the new system install. “How long would that be?” I asked in desperation. “Two weeks, maybe, but we cannot guarantee that,” was the answer.

But now that I had a Materializer, I had no intention to wait even a day. I took a piece of paper and wrote on it: I want a reliable Internet connection NOW! This wish looked completely hopeless, and I knew that! So much for the all-powerful human thought and the Materializer! However, I was determined to go all the way through, even if it meant an inevitable failure. I folded the piece of paper with the wish, inserted it into the Materializer, energized it with the Energizer, and pushed the big green button. Done! It was nearing midnight, so I went to bed.

“It Works!”
The first thing I saw the following morning was the postman delivering a package for me. I looked at the return address and my heart leapt as if I had just jumped out of an airplane. It was from the Internet company, and I knew what was inside. It felt completely surreal. I went inside and unwrapped the package. There was a modem.

After I recovered somewhat and already had it happily pumping megabytes of incoming emails, I called the company to cancel the installation order for a new system. “May I ask why you are canceling?” asked the representative. “Well, because I got the replacement modem you sent me!” was my answer. “Did you? Strange! I’m not seeing it on your account. We’ve been out of stock for two months now, and it’s been discontinued!”

Everything else I had learned in my life paled before this feeling of discovery: Eureka! IT WORKS!

A 1000% Success Rate
I then used my Materializer to manifest all kinds of wishes with a 100% success rate – which had a profound impact on my worldview. What am I saying? It is not 100% success rate, but a 1000% success rate – or rather an infinity – because the awareness it brings with it goes well beyond a particular dream fulfillment. Just as promised in The Art of Soaring: see the “magic” work once, and you will never be the same person!

And then I saw my daughter build one! At this point I realized I was ready to share my discovery of the Materializer with others. So I took it with me to the Ringing Cedars workshops around the world. And today – after countless people confirmed to me that it works – I share its design with you. For free. No secrets held back. No need to buy anything – you can easily put it together in a few minutes with some scrap materials you have at hand. Some suggested I patent it, manufacture it, and sell it. I have no need for that. I would rather see the world a happier place, and as for anything else – we can take care of it with our Materializers, right?

The more I think about it, the more I come to the conclusion that the Materializer’s operation apparently involves the same principles that underlie the functioning of the entire Universe, as revealed in Co-creation. This is probably why it never fails.

Are you ready? Great! Here we go!

Materialize your Materializer: A Complete Do-It-Yourself Guide
Materials needed: a used cardboard box (I used an old Priority Mail box), some scraps of cardboard, some Scotch tape or paper glue, a marker, a couple sheets of thick paper, a small piece of colored paper (your favorite color) or a color pencil. Of course you can go fancy and use other materials, add more decorations, etc. but this does not seem essential for Materializer’s effectiveness. What matters is that you like it. The same goes for the size: some make it real big (like a TV box), others – just as successfully – make it small enough to fit into your pocket. Again, the important part is that you like it, that it feels like the right size to you. Mine is approx. 10″ (25 cm) wide, 9″ (22 cm) deep, and 6″ (15 cm) tall. My Energizer is 8″ (20 cm) long and just above 4″ (10 cm) wide at its widest point.

Time needed: 30 minutes. After that, it can last a lifetime and be passed on from one generation to the next. Potency will only increase with time.

Power requirements: Does not require batteries or grid electricity. Powered exclusively by your muscles (the Energizer) and your thought (all the rest). Note that Energizer does NOT refer to batteries brand – it means “the one who energizes.” It is the same as “Potentizer” and both terms can be used interchangeably.

Design: Materializer’s front panel contains operating instructions, written right on the box with a marker.The instructions read (with appropriate signs to aid comprehension): “1) Insert your wish. 2) Insert Energizer. 3) Press button. 4) Allow some time, check success reports.” The button (a circle of colored paper about 1″ or 3 cm in diameter) is attached in an appropriate spot with glue or tape.

Right side has a pouch for the Energizer. The pouch is made of two strips of thick paper (I used an old Priority Mail envelope) attached to the body with tape or glue.

Materializer’s back panel has a door (rectangle cut in the box on 3 sides) for Administrative Access inside the box. For convenience, the door has a handle (strip of cardboard attached to the door with tape or glue on both ends. For added security, the Admin panel is equipped with Login and Password fields (drawn with a marker) and an Enter button (drawn with a marker as well).

Left side has a pouch for Success Reports. The pouch is a rectangle of thick paper attached to the box on three sides with tape.

Materializer’s top has its name – MATERIALIZER – written with marker, and in the center – a slit for inserting your wishes. The slit can be adorned with a heart-shaped paper attached with tape or glue.

Bottom of the Materializer does not have any special features yet. This leaves room for further improvement.

Energizer is made our of a piece of cardboard, and is given a shape consistent with its purpose. An image of a cheerful Energizer is drawn thereon with a marker. By universal convention, Energizer is a masculine figure, while the Materializer is feminine (“Matter” literally means “Mother”).

Friendly Step-by-Step Operating Instructions
1) Write your wish on a piece of paper. You can use a pen or pencil of your choice; any kind of paper (even tissue paper) has proven quite successful.

2) Insert the wish into the Materializer through the top slit.

3) Take the Energizer and insert it into the slit. Agitate it, vigorously moving it in and out (up and down) until the Materializer is fully energized. After that, leave it immersed into the slit. Then push the big green button.

4) The Energizer protruding from the top of the Materializer is a sign that there is a new wish inside (similar to a flag on a mailbox – which actually uses the same basic principles). The Administrator (the person responsible for fulfilling your wishes – in my household it is myself regardless of whose wish it is) enters his Login and Password, presses the Enter button, then opens the access door, takes out the wish, reads it, and places it into the Success Reports pouch on the left side. The Administrator then removes the Energizer from the slit, congratulates him on the work well done, and places him to rest in his pouch – this is a sign that Materializer is ready for another wish.

Note: because the Materializer has over 100% success rate, all wishes can be put straight into the Success Reports pouch immediately after being taken out of the Materializer.

Troubleshooting: “I followed all the steps, but my wish is not yet fulfilled.” Possible causes: a) You have not energized your wish enough with your Energizer. Remember: your thought energy is what powers the whole thing. The Materializer is not a magic box that does it for you! b) You have not allowed sufficient time for it to manifest. c) What you think is your wish actually is not! The Materializer only materializes your dreams. An example: you think that you wish a latest model of a sports car. It is actually not your wish – it is that of the car manufacturer! (For more examples, see the incomparable Growing Vegetables with a Smile by Nikolay Kurdyumov.) d) You do not believe it will work. Again, the whole thing is powered by your thought – so how can it work if you think that it won’t!? I even think that the only reason why we humans are mortal is that we cannot believe sincerely and without reservation in our own immortality. But this is already another topic.

That’s it. Create! Enjoy! Soar! Prosper! And you do not even need to give me credit for inventing the Materializer: I have grounds to believe that the mysterious Ankh of Egyptian Pharaohs is actually an Energizer, so I could not agree more with how Kurdyumov put it in his Growing Vegetables with a Smile: “I have no doubt that many ingenious practices have been invented ten times over since ancient times. Yet we keep stumbling blindly along towards false goals. Why don’t we apply successful methods to our lives? Why are common everyday routines more acceptable than success? The reason is all in our minds.”

It has worked for me. Will it work for you? It depends on no one but you! But look at me: for quite some time now, my Materializer has been collecting dust on a shelf – I have no unmanifested desires left!

Dr. Leonid SharashkinDr. Leonid Sharashkin
Is the Series Editor, Co-translator, and Founder of the Ringing Cedars Press. It is through his efforts, that the Anastasia material and the Ringing Cedars Series have been published in English
Since his work on the Anastasia books, Dr. Sharashkin has been involved in a number of different projects which promote self-reliant, sustainable lifestyle choices based on the integration of human habitat with agro-ecosystems. He also travels internationally speaking on these topics and has recorded a collection of DVD’s that showcase his larger purpose.
Inspired by Anastasia’s reference to the existence of people who for eons have held fast to the ways of the ancients, Dr. Sharashkin’s latest quest has led him to seek out many of the keepers of Russia’s most secret traditions and take on the task of introducing their wisdom to the western world.
Dr. Sharashkin can be reached at: www.ringingcedars.com

from:    http://spiritofmaat.com/magazine/january-2013-the-new-time-issue/build-your-own-materializer/